top of page
Authorized Distributor of Global Brands | Genuine Products
DediProg SF600Plus-G2 SPI NOR Flash Programmer
SF600Plus-G2 is a high-speed Serial NOR/NAND Flash programmer with In-Circuit Programming (update the SPI Flash soldered on board) and Standalone programming (update the SPI Flash in the socket adaptor) Mode. With DediProg SF software and the USB, it offers friendly user interfaces and powerful features.
The newly designed SF600Plus-G2 is the upgraded version of SF600 and SF600Plus, which greatly increases the programming efficiency with the SOC architecture of FPGA. Other than the original functions of the SF600/S600Plus, it can also support SPI NAND, which will be convenient for the developer when programming.
In the package:
- SF600Plus-G2 Programmer x 1
- USB 2.0 100cm Cable (A Male -C Male) x 1
- Power Adapter (Including US and EU plugs) x 1
- SF600 ISP Cable x 1
- SF100 ISP Cable x 1
- SF600 Universal Adaptor x 1
- Pin 2x10 to 2x10 Cable x 1
- Pin 2x4 to 2x4 Cable x 1
- ProgMaster Socket Bottom board(SF600Plus-G2) x1
- Product Card (Software Download QRcode) x 1
Highlights
- High-speed USB and high SPI performance; the USB and Standalone mode support any volume of the SPI Flash on the market.
- Support 1.2V low voltage IC.
- Support IC Kinds: SPI NAND/SPI NOR.
- In-Circuit Programming: Program on board SPI Flash.
- Off-line Programming: Program SPI Flash in the socket. (Support ProgMaster's and NuProgPlus' sockets)
- Start button feature: Able to Batch when connecting to the software.
- Signal conflict protections.
- Multi-Programmers Capability through USB.
- Programmer Index displays on the programmer.
- Support 2 CS pins.
- Stand-Alone Mode: Support Start button programming and Control Port for removing control programming.
- Support WIN8 and above.
- Support both 32 and 64bit OS.
- Support Single/Dual Multiple Dies.
- Support Single/Dual/Quad/Octal. IO.
bottom of page